www.pulsar.pl PSDCB18129B
4
Table 2. Description of PSU components and connectors ( tab.2)
Element no.
[Fig. 3]
Description
[1]
PSU module
[2]
L-N
power-supply connector 230V/AC,
PE protection connector
[3]
green LED
indicates AC power
[4]
P1 potentiometer,
output voltage adjustment
[5]
BAT+/GND: battery outputs
+ BAT=red, - GND=black
[6]
TAMPER,
contact of sabotage protection
(NC)
[7]
Additional connector for LED indication
[8]
Ibat - Selection jumper for charging current:
Ibat =1A
Ibat =4A
Legend:
jumper installed,
jumper removed.
Factory settings: Ibat =1A (jumper installed).
[9]
fuse block LB9-A
[10]
fuse block LB9-B
Fig.3. The view of the PSU.
1.4 Specifications:
- electrical parameters (tab.3)
- mechanical parameters (tab.4)
- operation safety (tab.5)
- operating parameters (tab.6)
