Pulsar PSBEN 2012B/LCD, Руководство пользователя

Страница: 14 / 44

www.pulsar.pl PSBEN2012B/LCD
BLACK POWER
14
5.4.2 LCD screen
– current parameters
To set the screen, press the „ESC” button, use the „<” or „>” buttons to choose the
icon and press the
„SET” button to confirm.
The screen displays electrical parameters and the status of the technical outputs during operation.
Illumination of an element informs about an activation and reflects the status of LEDs on the PCB of the PSU (see
Table1, [12]).
Fig. 8. LCD panel
– PSU parameters.
Table 7. The description of the screen symbols - current parameters of the PSU.
Screen field Description
Additional
information
- 230V AC power ON
(highlighted = AC power on) Sections 6.2.4
- Battery charging indication
(highlighted = battery charging)
- PSU overload indication
(highlighted = PSU overload)
Sections 5.10
- PSU failure indication
(highlighted = PSU failure)
Sections:
- 5.4.6
- 5.6
- Battery failure indication
(highlighted = battery failure)
Sections:
- 5.4.6
- 5.6
- EXTi input status indication
(highlighted = EXTi input activated)
Sections:
- 5.4.6
- 5.7
The current settings of the
P
BAT
, J1 and J2 jumpers.
TAMPER input status (highlighted = activated)
Sections 5.8
Current electrical parameters of the PSU:
U
BAT
– battery voltage
U
AUX
– AUX output voltage
I
AUX
– output current
Sections 5.4.4
The status of the technical outputs:
EPS - AC power indication
open= AC power failure
closed = AC power
– O.K.
PSU
– PSU failure indication
open= PSU failure
closed = PSU working correctly O.K.
APS
– battery failure indication
open= battery failure
closed = battery O.K.
Sections:
5.4.6
5.6