Pulsar PG5250BCO, Руководство оператора

Страница: 23 / 26

MAINTENANCE
23
• If needed, install a fuel hose that will extend to a suitable fuel container large enough to catch the fuel being drained
from the tank.
• Turn the fuel valve to the ON position and open the fuel tank cap slightly to equalize pressure.
• When the fuel has drained from the tank, close the fuel valve and reinstall fuel line securely on petcock.
Draining the carburetor
• Turn the fuel valve to the OFF position.
• Turn the engine OFF.
• Position a suitable container under the carburetor drain screw to catch fuel; loosen and remove the screw.
• Allow fuel to drain completely into container, be sure to wipe up any spilled fuel right away.
• Retighten drain screw, taking care that the gasket seal is in place.
Storage and Transportation of the Generator: (See Fig 2
3
)
• Remove any debris that has collected on the generator and around the muffler and controls. Use a vacuum cleaner to
pick up loose debris. If dirt is caked on, use a soft bristle brush.
• Inspect air cooling cylinder fins and flywheel fan. Remove any debris if obstructed.
• For short-term storage, start generator once every 7 days.
• For long-term storage, add fuel stabilizer to prevent stale fuel from causing acid and gum deposits in the fuel system
and carburetor.
• Store in a sheltered location and use a suitable cover to protect from dust.
Fig 2
3
Engine Long Term Storage:
• Remove the spark plug and pour about 1 teaspoon of 10W30 Engine oil into the spark plug hole. Reinstall the spark plug.
With the ON/OFF switch in the OFF position pull the recoil starter cord several times to coat the cylinder walls with oil.
• Slowly pull the recoil starter until you feel the engine build compression (When you feel resistance). Leave the Engine in
this state as this will prevent corrosion on the cylinder walls if stored for a long period of time.
CAUTION!
Consult local hazardous waste management in your area for the proper way to dispose of
used fuel.