Operation (cont’d)
15
4. Push LPG Converter button 2-3 times to bleed air in the LPG path.
5. Push the choke lever in OPEN position.
6. Continue to desired start-up method.
IF USING GASOLINE FUEL SOURCE
1. Ensure that there is no propane in the engine. If LPG was used in the
most recent operation, start engine by following the steps outlined in
the Propane Fuel Source section on previous page. Once running, shut
off the propane fuel source and allow the engine to use up the remaining fuel.
After the engine stops, continue to step 2.
3. If the engine is cold: Pull the choke lever out to close the choke.
2. Rotate the fuel valve lever to ON position.
4. Continue to desired start-up method.
RECOIL START METHOD
2. Press the engine switch to the "ON" position.
1. Disconnect all devices from the outlets on the generator panel.
3. Grasp the recoil starter handle and pull it until the engine starts.
Do not allow the recoil starter to snap back. Return it slowly by hand
Содержание PG4500B
Страница 1: ...4500 4500B...
