background image

 

 
3. Maintenance. 
 

Any  and  all  maintenance  operations  may  be  performed  following  the  disconnection  of  the  PSU  from  the  power 

supply network. The PSU  does not require performing any specific maintenance measures. However, in case of a thick 
dust layer, clean the PSU with compressed air. 

 

                         

WEEE MARK

 

 
 
 
 

According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as 

unsorted municipal waste and to collect such WEEE separately.

 

 

 
 

 
 
 
 

 

 
 
 
 
 
 
 
 

Pulsar K.Bogusz Sp.j.  

Siedlec 150,  32-744 Łapczyca, Poland 

Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50 

e-mail: 

[email protected]

[email protected]

 

http:// 

www.pulsar.pl

www.zasilacze.pl

 

 

 

GENERAL WARRANTY CONDITIONS 

 
 
1. Pulsar K. Bogusz Sp.j. (the manufacturer) grants a two-year warranty for the equipment, starting from the initial product date 
of purchase placed on the receipt.  
2. If a purchase proof is missing, a three-year warranty period is counted from the device’s production date.  
3. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (the selection is at the 
manufacturer’s discretion) if the malfunction is due to the manufacturer, includes manufacturing or material defects, unless such 
defects have been reported within the warranty period (item 1 and 2).  
4. The equipment subject to warranty is to be brought to the place where it was purchased, or directly to the main office of the 
manufacturer.  
5. The warranty applies to complete equipment, accompanied by a properly filled warranty claim with a description of the defect.   
6. Should the claim be accepted, the manufacturer is obliged to provide warranty repairs, at the earliest convenience, however not 
later that within 14 days from the delivery to the service centre of the manufacturer.  
7. The repair period mentioned in item 6 may be prolonged, if there are no technical possibilities to carry out the repairs, or if the 
equipment has been conditionally accepted, due to the breaking warranty terms by the claimant.  
8. All the services rendered by force of the warranty are carried out at the service centre of the manufacturer, exclusively.  
9. The warranty does not cover the defects of the equipment, resulting from: 
- reasons beyond the manufacturer's control, 
- mechanical damage, 
- improper storage and transport, 
- use that violates the operation manual or equipment’s intended use 
- fortuitous events, including lightning discharges, power failures, fire, flood, high temperatures and chemical agents,  
- improper installation and configuration (in defiance with the manual), 
10. The warranty is void in any of the following circumstances: 
- construction changes  
- repairs carried out by any unauthorized service center 
- damage or removal of warranty labels 
- modifications of the serial number 
11. The liability of the manufacturer towards the buyer is limited to the value of the equipment, determined according to the 
wholesale prices suggested by the manufacturer on the day of purchase.  
12. The manufacturer takes no responsibility for the defects that result from:  
- the damaging, malfunctioning or inability to operate the equipment 
- defects that result from using the equipment outside its stated specifications and operating specifications failing to abide by the 
recommendations and requirements contained in the manual, or the use of the equipment.  

 

Содержание MPSB12

Страница 1: ...te PSU operating status presence of AC voltage presence of DC voltage battery voltage The module is also equipped with technical outputs of AC power loss PSU failure low battery voltage 1 1 Description of the module s components and connectors fig1 tab 1 Table 1 Element no Description 1 LED indicating presence of 230VAC voltage 2 LED indicating presence of DC voltage at the PSU output 3 LED indica...

Страница 2: ...y 20 90 without condensation Storage temperature 20ºC 60ºC Table 3 Dimensions 110 x 44 x 55 LxWxH mm 2 Fixing M3 screws mounting plate adjusted for PSB13 8V series power supplies Connectors Ф0 41 1 63 AWG 26 14 Net gross weight 0 1 0 13 kg 2 1 Requirements The module is to be mounted by a qualified installer holding relevant permits and licenses applicable and required for a given country for 230V...

Страница 3: ...BLE It can cause a device failure or an electric shock 7 Connect load loads to proper output connectors of the power supply positive pole is marked as V negative pole as V 8 Connect the battery in accordance with the signs colours 9 Once the tests and operation control have been completed the enclosure cabinet can be locked Fig 2 Diagram of connecting the module to the PSB power supply unit Fig 3 ...

Страница 4: ...ccepted the manufacturer is obliged to provide warranty repairs at the earliest convenience however not later that within 14 days from the delivery to the service centre of the manufacturer 7 The repair period mentioned in item 6 may be prolonged if there are no technical possibilities to carry out the repairs or if the equipment has been conditionally accepted due to the breaking warranty terms b...

Отзывы: