2
Features:
•
DC 13,8V/6A uninterruptible power supply
•
fitting battery: 17Ah/12V
•
wide range of mains supply: 176÷264V
•
high efficiency 80%
•
battery charging and maintenance control
•
excessive discharging (UVP) protection
•
jumper selectable battery charge current 1A/2A
•
battery output full protection against short-circuit
and reverse polarity connection
•
LED indication
•
protections:
•
SCP short-circuit protection
•
OVP overvoltage protection
•
overvoltage protection (AC
input
)
•
against sabotage
•
overload protection (OLP)
CONTENTS:
1. Technical description.
1.1 General description
1.2 Block diagram
1.3 Description of PSU components and connectors.
1.4 Specifications
2. Installation.
2.1 Requirements
2.2 Installation procedure
3. Operating status indication.
3.1 LED indication of operating status
4. Operation and use.
4.1 Overload or short circuit of the PSU output (SCP on)
4.2 Disconnection of discharged battery
4.3 Maintenance
1. Technical description.
1.1 General description.
A buffer PSU is intended for an uninterrupted supply to devices requiring stabilised voltage of 12 V DC (+/-
15%). The PSU provides voltage of U=13,8 V DC. Current efficiency:
1. Output current 6,0A + 1,0A battery charge
2. Output current 5,0A + 2,0A battery charge
Total device c battery: 7A max.
In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the
switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which
can accommodate a 17Ah/12V battery. A micro switch indicates door opening (front cover).
OPTIONAL POWER SUPPLY CONFIGURATIONS:
(visualisation available at:
www.pulsar.pl)
BATTERY 17Ah:
1. Buffer power supply unit HPSB 13,8V/4x1,5A/17Ah.
- HPS LB4 4x1,5A (AWZ576) + 17Ah
2. Buffer power supply unit HPSB 13,8V/6x1,0A/17Ah.
- HPS LB8 6x1,0A (AWZ580 or AWZ579) + 17Ah
3. Buffer power supply unit HPSB 13,8V/8x0,5A/17Ah.
- HPS LB8 8x0,5A (AWZ578 or AWZ580) + 17Ah
4. Buffer power supply unit HPSB 13,8V/12V/5A/17Ah.
- HPS RN500 (13,8V/12V) + 17Ah
5. Buffer power supply unit HPSB 13,8V/12V/4x1A/17Ah.
- HPS RN500 (13,8V/12V) + LB4x1A (AWZ575 or AWZ576) +17Ah
6. Buffer power supply unit HPSB 13,8V/(5V÷7,4V)/2A/17Ah.
- HPS DCDC20 (5V÷7,4V/2A) + 17Ah
Содержание HPSB 7012C
Страница 4: ...4 Fig 2 The view of the PSU...