www.pulsar.pl
HPSB20A12C
GREEN POWER
2
Features:
DC 13,8V/20A uninterruptible power supply*
fitting battery: 17Ah/12V
wide range
of mains supply: 176÷264V
built-in power factor correction system (PFC)
high efficiency 85%
battery charging and maintenance control
excessive discharging (UVP) protection
jumper selectable battery charge current
2A/4A/8A
battery output full protection against short-circuit
and reverse polarity connection
LED indication
protections:
SCP short-circuit protection
OVP overvoltage protection
overvoltage protection (AC input)
against sabotage
overload protection (OLP)
overheat protection OHP
forced cooling - built-in fan
warranty
– 2 year from the production date
CONTENTS:
1. Technical description.
1.1 General description
1.2 Block diagram
1.3 Description of PSU components and connectors.
1.4 Specifications
2. Installation.
2.1 Requirements
2.2 Installation procedure
3. Operating status indication.
4. Operation and use.
4.1 Overload or short circuit of the PSU output (SCP on)
4.2 Disconnection of discharged battery
4.3 Maintenance
1. Technical description.
1.1 General description.
A buffer PSU is intended for an uninterrupted supply to devices requiring stabilised voltage of
12V DC (+/-15%).
The PSU provides voltage of
U=13,8V DC.
Current efficiency:
1. Output current 18A + 2A battery charge
*
2. Output current 16A + 4A battery charge
*
3. Output current 12A + 8A battery charge
*
Total device c battery: 20A max
*
.
In case of power decay 230V, a battery back-up is activated immediately. The PSU is constructed based on the
switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can
accommodate a 17Ah/12V battery. A micro switch indicates door opening (front cover).
The power supply housing has space for additional modules (fuse blocks, voltage regulators and DC/DC
converters).
*
Refer to chart 1
