www.pulsar.pl POE042455B
GREEN POWER CCTV PoE
5
W
H
D
1.4 Technical parameters.
- electrical parameters (Table 3)
- mechanical parameters (Table 4)
- safety of use (Table 5)
- operation parameters (Table 6)
Electrical parameters (Table 3).
Mains supply
176
÷264V AC
Current consumption
1,4A@230V AC typ.
PSU’s power
155W max.
Efficiency
83%
Output voltage
23V
÷ 27,6V DC – buffer operation
19V
÷ 27,6V DC – battery operation
The adjustment range of the output voltage
24÷28V DC
Output current t
AMB
<30°C
4 x 1A + 0,5A battery charging
– see diagram 1
4 x 0,87A + 2A battery charging
– see diagram 1
Output current t
AMB
=40°C
4 x 0,85A + 0,5A battery charging
– see diagram 1
4 x 0,45A + 2A battery charging
– see diagram 1
Ripple voltage
150 mV p-p max.
Battery charging current
0,13A
Current consumption by the PSU
0,5A/2A max. @ 2
x7Ah (± 5%) I
BAT
jumper selectable
Short-circuit protection SCP
PoE MODULE
4 x F 1A or 4 x PTC 1,1A (jumper selectable)
PSU MODULE
105% ÷ 150% of PSU power, electronic current limiting
Overload protection OLP
105% ÷ 150% of PSU power, electronic current limiting
Battery circuit protection SCP and reverse
polarity connection
melting fuse
Overvoltage protection OVP
U>115% ÷ 150% of the output voltage - disconnection of the
output voltage, automatic return
Deep discharge battery protection UVP
U<19
V (± 5%) – disconnecting the battery terminal
Surge protection
4 x varistor
Antisabotage protection:
- TAMPER output indicating enclosure opening
- microswitch, NC contacts (enclosure closed),
0,5A@50V DC (max.)
Optical indication of operation:
YES
– LED lights
Technical outputs:
- FPS technical output indicating output fuse
activation
- OC type, 50mA max.
Normal operation: L state (0V),
failure: H state (hi-Z), (automatic return once the normal
operation is restored)
- relay type: 1A@ 30VDC/50VAC, delay time: approximately
10 seconds
F1 ÷ F4 fuses
F 1A or PTC 1A
Mechanical parameters (Table 4).
Enclosure dimensions
300 x 407 x 126 mm (WxHxD)
Mounting
See Fig. 3
Battery housing:
2x7Ah/12V (SLA) max.
250x165x105mm (WxHxD) max
Net weight
4,57kg / 4,91kg
Enclosure
DC01 steel plate, 1,0mm, RAL 9003
Closing
Cylindrical screw x 2 (at the front) lock assembly possible
Terminals
Switch mode power supply:
Φ0,4-2,5 (AWG 26-10)
PoE module: Φ0,5-2,1 (AWG 24-12)
AUX1...4 outputs: RJ45 4pin
TAMPER output: Φ0,8
Notes
The enclosure has a 15mm distance from the mounting surface so the cables can
be led.
