EN
High temperature or high pressure steam disinfection of the oximeter is
not permitted. Refer to User Manual in the relative chapter for
instructions of cleaning and disinfection.
Do not immerse the oximeter in liquid. When it needs cleaning, please
wipe its surface with disinfectant solution using a soft cloth. Do not
spray any liquid directly onto the device.
When cleaning the device with water, the temperature should be lower
than 60°C.
As to the fingers which are too thin or too cold, it would probably affect
the normal measure of the patients' SpO2 and pulse rate, please clip
the thick finger such as thumb and middle finger deeply enough into
the probe.
Do not use the device on infant or neonatal patients.
The product is suitable for children (Weight should be between 10 kg to
40 kg).
Prevent children from swallowing the product or its accessories. Please
let the child use the product only under the supervision of an adult.
The device may not work for all patients. If you are unable to achieve
stable readings, discontinue use.
The update period of data is less than 5 seconds, which is changeable
according to different individual pulse rate.
Please read the measured value when the waveform on screen is
equably and steady-going. This measured value is optimal value. And
the waveform at the moment is the standard one.
If some abnormal conditions appear on the screen during test process,
pull out the finger and reinsert to restore normal use.
The device has normal useful life for three years since the first