Cable Restraint
IMPORTANT – ENSURE EXTENSION CORD IS FITTED TO THE RESTRAINT CORRECTLY
AND THAT THE RESTRAINT IS FITTED TO THE TROLLEY PROPERLY.
ASSEMBLY (CONTINUED)
1. Connect extension cord to the cable on
the machine. Make a loop at 40cm on the
extension cord.
2. Feed loop up through cable restraint opening.
3. Place extension cord over top of hook.
Pull down on cord to lock on hook.
4. Pull down on the extension cord firmly to
ensure it does not slip.
IMPORTANT! When turning the On/Off Switches
please do so one at a time. Both switches
are protected with a water-proof cover. If the
waterproof cover has been broken, please contact
your nearest Pullman agent for repair/service.
9
PULLMAN 60L WET & DRY VACUUM WITH OUTRIGGER
WD60LSSO
