3
PULLMAN 30L WET & DRY VACUUM
WD30BV1
1.
Do not
operate the vacuum cleaner too close to heaters, radiators, or other
hot surfaces.
2.
Before inserting the plug into the wall, make sure your hand is dry.
3.
Before turning on the vacuum cleaner, remove any large or sharp objects from
the floor or cleaning surface in order to prevent damage to the filter.
4.
When you want to pull the plug from the wall,
do not
use the power cable, gently
pull the plug from the power socket.
5.
If the hose inlet or telescopic chrome tube are blocked, you should switch off the
cleaner straight away and remove from mains power. Clear the blockage before
attempting to start the vacuum cleaner again.
BEFORE YOU BEGIN
THIS MACHINE IS EQUIPPED WITH A CORD AND PLUG. IN THE EVENT THAT EITHER OF THESE PARTS
GET DAMAGED, IT MUST BE REPAIRED BY A QUALIFIED TECHNICIAN.
17.
If the air inlet, floor head or the telescopic tube
is blocked, switch off the cleaner straight away
and remove from the Mains power. First clear
the blocked object before attempting to start
the cleaner vacuum again.
18.
Do not leave the appliance unattended when it
is connected to a Mains power supply.
19.
Before carrying out any maintenance service
or cleaning the filters, always switch off the
vacuum cleaner and disconnect the plug from
power supply.
20.
Keep ends of the hose, telescopic tube and
other openings away from your face and body.
21.
Do not use the vacuum cleaner if it is damaged
or breaks down. Check the electrical regularly
for defects. If connection cables, electrical
hoses, electrical contacts and electrical tubes
are damaged, have them replace immediately.
22.
Never clean any of the electrical parts,
especially the electrical connections with water
or liquid cleaners.
23.
Never attempt to make any modifications
electrically to the vacuum cleaner.
24.
Always store the appliance indoors in a cool
and dry place.
25.
For indoors use only.
26.
Damage caused by improper use or by not
observing the instructions in this manual will
void warranty.
