pullman Ermator w250, Руководство по эксплуатации

Страница: 12 / 24

Revision 3 11
Problem solving
The W250 and W350 are manufactured for a severe environment and tasks, but the user must notice
that the machine contents of components which must be protected from hits and blows. Filter, sealings
connections are carefully chosen to serve the operator. Therefore must the machine be treated with
knowledge as to work correctly for many years.
Problem Cause Procedure
Motor don´t start No current Connect the machine
Defect cable Change
Defect switch Change
Motor stops immediately Wrong fuse Connect to proper fuse
Motor runs, but no suction Hose not connected Connect the hose
Hose blocked Clean the hose
Motor runs, but poor suction Hole on the hose Change hose
Blocked filter Change filter
Suction unit loose Adjust
Dirt in the hose or Clean the hose and intake
intake
Defect sealings Change current sealing
Dust is blowing from motor Defect or loose filter Adjust or change
Abnormal noise Order service
SAVE THESE INSTRUCTIONS!