pullman Ermator S-Line Series, Руководство по эксплуатации

Страница: 7 / 44

9. PROBLEM SOLVING
The dust extractors are designed and manufactured for severe environments and tasks, but the user must note that
the machine must be protected from knocks and blows. Filter, seals, attachments, and connections are carefully
adapted and selected with regard to the operator’s work environment. Therefore, the operator and service
personnel must treat the machine with care in order for it to work correctly for many years.
Issue Cause Solution
Motor doesn’t start
No power Plug in machine
Cable defective Replace cable
Switch defective Replace switch
Soft start defective Replace soft start
Motor stops
immediately after
starting
Wrong fuse Connect to correct fuse
Shortcut in cable/machine Order service
Motor runs but there is
not suction
Hose not connected Connect hose
Hose clogged/blocked Clean hose
No dust collection bag
Fit dust collection
system
Motor runs but poor
suction
Hole in hose Replace hose
Filter clogged
Clean filter/Replace
filter
Loose top cover Adjust
Defective gaskets Replace affected gaskets
Dust blown from motor Wrongly assembled or
damaged filter system
Adjust/Replace filters
Abnormal noise
Order service
SAVE THESE INSTRUCTIONS!