Mini SMT Reflow Oven User Manual
1. Set up field.
1.1. Please do the work in the clean environment condition.
1.2. Do not put the machine near the electromagnetism interfering resource.
1.3. Do not put the oven exits and entrances face towards to the fan and the
window.
2. Power supply
Please use system 220V. Ensure the machine contacts the earth well and
requested professional electrician operation.
3. Adjust the reflow oven height.
By adjust the machine leg to adjust the height. The way is follow: use
industrial or alcohol gradienter to measure. Then adjust the machine leg to
adjust the dryer on all sides till it is completely horizontal.
4. Caution:
4.1. The working environment should be clean. So the welder quality is
good.
4.2. Do not use and store the machine out of door, high temperature and
humid condition.
4.3. During operation take care of the high temperature, avoid scald.
4.4. When overhaul the machine, please cut off the power supply to avoid
electric shock or cause short circuit.
4.5. If move the machine after overhaul, must check all the parts, especially
the net-belt position. Cannot make it be lock or fall off.
4.6. Ensure the machine is stable, not lean or instable. Adjust the leg under
the machine to keep the transmission horizontal. Or the PCB will shift in the
transmit process.
4.7. Do not put too big and big absorbed heat components into the oven
avoiding damage the net-net and affect the temperature.
4.8. Put lubricating oil into the transmission chain every 7 days.
4.9. Do not put the inflammable and explosive dangerous goods near the
reflow oven.
4.10. Do not reach hands into the reflow oven when the machine is in normal
working condition.
Daily Maintenance
1. Keep the electrical control cabinet clean.