LED New Light Source Reflow Oven T-960
9
sides till it is completely horizontal.
4. Caution:
4.1.
The working environment should be clean. So the welder quality is good.
4.2.
Do not use and store the machine out of door, high temperature and humid
condition.
4.3.
During operation take care of the high temperature, avoid scald.
4.4.
When overhaul the machine, please cut off the power supply to avoid electric
shock or cause short circuit.
4.5.
If move the machine after overhaul, must check all the parts, especially the
net-belt position. Cannot make it be lock or fall off.
4.6.
Ensure the machine is stable, not lean or instable. Adjust the leg under the
machine to keep the transmission horizontal. Or the PCB will shift in the transmit
process.
4.7.
Do not put too big and big absorbed heat components into the oven avoiding
damage the net-net and affect the temperature.
4.8.
Put lubricating oil into the transmission chain every 7 days.
4.9.
Do not put the inflammable and explosive dangerous goods near the reflow
oven.
4.10.
Do not reach hands into the reflow oven when the machine is in normal
working condition.
Daily Maintenance
1. Keep the electrical control cabinet clean.
