IRDA-WELDER T-890 USER MANUAL
Http://
www.tech168.cn
14
all plastic plug-in unit, carries on the cover using the aluminum tin foil, prevented
high temperature infrared dries the distortion or the harm. But it is not wraps
completely.
4). Clean and dry the PCB board after reflow and dry it, the check it; if it is not good,
can reflow again. If it is still not good enough, please operate the whole process
again.
Daily maintenance:
1. Clean the heating pipe of the lamp body bottom, after the machine has been used
for a period of time.
2. Use the oil to clean the slipper of the connecting rod, the guide rod, polish rod, etc.
3. Do not cut the power off right after the work finished, You need wait until the fan
cools down, so that to prolong the useful time.
Cautions:
1. Be careful of operating under high temperature condition.
2. Pull out the power if don’t use the machine for a long time.
Warranty
：
The complete machine has a warranty period of 1 year from the time of purchase and
lifelong service support as well as a long-term factory price supply. The life of the
infrared lamp should be around 1000 working hours, guaranteed usable for 3 months.
We provide online Q/A and troubleshooting support and technical advice service.
Statement:
The images and screenshots in this product manual may vary slightly from the actual
purchased product.
