PUFF AVATAR Q, Руководство пользователя

Страница: 23 / 40

23
Examples of wattage with different impedances:
• Avatar Q 1.5 ohm resistance – 9,12W
• Avatar Q 1.0 ohm resistance – 13,70W
• Avatar Q 0.5 ohm resistance – 27,38W
Calculation of the wattage is easy to be done with the following formula:
W=V²/Ω
(where: Watt=Volt x Volt / impedance)
REPLACEMENT OR REFILLING OF CARTOMIZER
When there is a significant reduction of liquid in the cartomizer, refill it with PUFF liquid for electronic
cigarettesor replace it with a filled one.
Replacement of the internal resistance
When there is a significant reduction of vapor during use, refill the cartomizer with PUFF liquid for
electronic cigarettes or replace the internal resistance of the cartomizer ( see “How to replace the
resistance”).
REPLACEMENT OR RECHARGE OF THE BATTERY
When the two leds on the battery backing flash 10 times during inhalation and the electronic cigarette
does not produce vapor any longer, the battery must be recharged. Recharge the battery or replace it
with a charged one.
RECHARGING MODE
Micro USB charger cable
Insert the PUFF micro USB cable plug into the microusb input port of the battery, then connect it with
a PUFF USB port. The leds under the button will flash, then a little red led will light beside the microusb
input of the battery, thus indicating that recharging process has started. When the charging is complete
the red led will turn off.
Wall charger
Follow the above charging instructions by connecting the USB plug of the cable into the USB output
port of PUFF wall charger.
The first charging time of a new battery is 8 hours.
Succeeding recharges take about 2/3 hours.
MANUAL_AVATAR_Q.indd 23 13/11/15 20:10