PUFF Avatar 2, Руководство пользователя

Страница: 50 / 96

G B
USE OF THE AVATAR ELECTRONIC CIGARETTE
INSTALLATION – CONNECT THE AVATAR BATTERY TO A CARTOMIZER.
FIRST STEP
Remove the battery and a cartomizer from their seat.
SECOND STEP
Fill the empty cartomizer with PUFF liquid for electronic cigarettes.
To fill the cartomizer, remove the plastic cap. Fill the cartomizer with
Puff liquid for electronic cigarettes up to the level MAX and re-position
the plastic cap.
THIRD STEP
Connect the cartomizer to the battery.
FOURTH STEP
Wait 10 minutes before using the product.
FIFTH STEP
Smoke normally with long gentle draws.
OPERATIVE MODE
The circuit becomes active by pressing the button on the back of the
battery. The battery indicator will light up instantly and also the lateral
LED lights indicating the state of the battery charge (see table at the
end of the language section). Hold down the button during inhalation.
As the button is released, the vaporization will cease and the ope -
rating mode will go on standby. The ideal angle for use is between
horizontal and 30°.
REPLACEMENT OF FILTER
When there is a significant reduction of liquid inside the filter, reload it
with Puff liquid for electronic cigarettes or replace it with a new one.