PUFF Avatar 2, Руководство пользователя

Страница: 48 / 96

G B
INTRODUCTION TO THE PRODUCT
N°1 Avatar battery, N°2 cartomizers, N°1 micro USB battery charger,
N°1 battery wall charger, N°1 instruction manual.
STRUCTURE OF THE AVATAR ELECTRONIC CIGARETTE
he principle of the Avatar electronic cigarette
Avatar electronic cigarette uses the technology of super-critical physi -
cal atomization to vaporize the liquid contained in the filters.
AVATAR BATTERY 550MAH
The battery of the Avatar electronic cigarette is an integrated structure
consisting of an external structure in metal, a lithium-ion battery of
3,7V, a chip, electronic circuits controlled by a microprocessor, a led
indicating operative mode under the manual button and 5 lateral Led
lights which indicate the amount of charge remaining in the battery
(see table at the end of the language section of the information le -
aflet). The Avatar battery can be turned off by clicking 5 times on the
manual button. To turn it on, click 5 times.
AVERAGE TIME FOR RECHARGING: ABOUT 3/4 HOURS.
CARTOMIZER
The cartomizer of the Avatar electronic cigarette is an integrated
structure made up of an external metal structure, an internal structure
in hard, transparent, heat-resistant plastic, a wick to absorb the liquid,
a vaporization chamber and a small, plastic mouthpiece.
INSTRUCTIONS FOR USE
Never keep the cartomizer connected to the battery while re-filling
with the liquid. Remove the plastic mouthpiece from the cartomizer.
Once opened, tilt the cartomizer to an angle of about 30° and gently
pour the liquid onto the sides until it reaches the limit “MAX” printed
on the outside.
Keeping the full cartomizer in a vertical position, re-insert the plastic