Pudu Puductor2 PJ1 Standard, Быстрое руководство

Страница: 20 / 24

PUDU ROBOTICS
16
Emergency handling
When the robot is not working properly, in an unexpected condition or in any other emergency that
may cause harm to the surrounding environment, you can stop the robot by pressing the emergency
stop switch on the top.
STOP
Working with the disinfectant
Refill the disinfectant tank:
First, verify that the disinfectant for refilling is the same as that in the robot, or there is no liquid
in the disinfectant tank. Open the liquid inlet, and fill in the prepared disinfectant from the inlet.
Meanwhile, observe the liquid level through the level indicator, and stop the refill once the
maximum level is reached.
Replace the disinfectant:
Make sure that the disinfectant in the ultrasonic chamber has been returned to the disinfectant
tank. If this is not the case, make it so first. Open the liquid outlet, unscrew the switch, and empty
the disinfectant tank. Add the new disinfectant in the same way as you perform a refill.
Working with the UV lamp:
Measure the irradiance of a UV lamp in use at a vertical distance of 1m in front of and at the center
of the lamp. The measured value should be
≥
70
µ
W/cm2. If not, replace the lamp. First press the
spring holder on the head of the lamp, and then remove the lamp.