Pudu Puductor2 PJ1 Standard, Быстрое руководство

Страница: 16 / 24

PUDU ROBOTICS
11
the roll angle should not exceed 5
°
.
It is necessary to add fences or other barriers at the edge of a staircase, entrance to a downslope,
or other places where the robot is at risk of falling.
Pure black (such as baseboards), specular (such as walls) and fully transparent (such as floor-
to-ceiling glass windows) objects that are 16 to 22cm high from the ground may interfere with
the radar reflection of the robot and cause the robot to move abnormally. Make some necessary
modifications to the space to allow the radar to reflect (such as sticking some stickers).
Robots at the standby point, if arranged side by side, should stay apart from each other at a
distance of 35 cm, from the back wall at a distance of 15 cm, and from the side wall at a distance
of 35 cm.
When the battery drops to 10%, the robot should be charged timely. Running at a low battery for
a long time may impair battery life.
Unplug the charger in time after the charging cycle is complete. Do not leave the charger plugged
in for a long time if the robot is fully charged.
If not used for a long time, the robot should be shut down to protect the battery.
Always use exclusively original rechargeable batteries and chargers. Do not charge your robot
using non-original chargers.
Designate a person to charge the robot. Do not charge the robot or the battery separately in an
unattended manner.
Do not charge the robot near flammable and explosive objects.
Store and charge the robot in a dry area at room temperatures. Never place the robot and
charger in an area of elevated temperatures (>40
。
C). Never let water get into the robot and
charger.
Avoid any damage to the charger due to its collision with other objects.
If your charger is damaged and the charging current is abnormal, swap it out for a new one.
Disconnect the charger immediately upon receiving an alarm from the robot when charging.