background image

User manual

User manual

1. DO NOT place any open flame on the tray, and DO NOT place any flammable solids, 
gases or liquids.
2. It is forbidden to do cleaning and maintenance work when the machine is powered on.
3. To ensure safety, it is recommended to adjust the robot speed to medium or below, and 
it is forbidden to play in front of the robot to avoid unnecessary injury.
4. Temporary tray loading adjustment is prohibited during the robot's travel, all opera-
tions should be performed after clicking the screen to make the robot pause.
5. When the robot delivers food to the designated table number area, DO NOT perform the 
operation such as picking up the food before the machine body is stopped, so as to avoid 
the loss of food or personal injury caused by accidental collision.
6. If the robot is going away and the screen operation is invalid, or other emergency 
situations occur, please use the toe to kick the emergency switch at the charging port.
7. This product is a wheeled robot, which is limited to indoor flat environment (smooth 
ground, slope less than 5 degrees, protrusions not higher than 1cm), DO NOT use it in 
outdoor environments (such as open balconies) or on rugged floors (such as stairs).
8. DO NOT use it in an environment where the ambient temperature is above 50°C or 
below 0°C, or if there is any liquid or viscous material on the floor.
9. Please put away all kinds of wires on the ground in the environment before use to avoid 
dragging when the main unit is running. Remove sharp objects on the ground (such as 
decoration waste, glass, nails, etc.) before use to avoid damage to the machine chassis.
10. To push or move the robot while it is moving, first tap the screen to pause it.
11. DO NOT spill any liquid into the product.
12. DO NOT place any non-transportable objects (including children, pets) on a stationary 
or moving robot.
13. The robot has automatic obstacle avoidance function, but it is strictly forbidden to 
block the robot suddenly during the high-speed operation, otherwise it may cause a 
safety accident.

14. The blind-spot recognition area of the robot is shown below.

Safety instructions

* Our company does not assume any responsibility for all accidents caused by improper operation.

87°

87°

Содержание PuduBot






















Отзывы: