Page
25
of
41
Rev 1.4 8/20
Network Connection
1.
Operating Environment
Operating System: Windows 2000/2003/XP/Vista/7/8.1/10
Network Protocol: TCP/IP
Client PC: P4 / 128M RAM / 40GHD / support for scaled graphics card, support for DirectX8.0 or more advanced version.
2.
Equipment Installation
1) Connect camera to your network via a CAT5 or CAT6 patch cable or directly to your PC via a CAT5 or CAT6 cross over
cable.
2) Turn on camera power.
3) If successful, the orange network light will illuminate and the green light will start flashing. If unsuccessful, the cable is
bad, you are using the wrong cable, or you have connected to an inactive network jack.
3.
Network Connection
Connection method between network camera and computer, as in pictures 1.1 and 1.2, below:
Picture 1.1 Direct connections via “cross-over” network cable
Picture 1.2 Connections to LAN via patch cable to LAN wall jack or LAN switch
