Page
5
of
12
Rev 1.1 10/17
●
After completing the search, the LCD will automatically display all the devices which support ONVIF protocol
on the connected LAN. You can use the Joystick Tilt feature (up and down) to see all of the “found” units.
●
Scroll, using the joystick to select each device you wish to control and press the “ADD” button to add that de-
vice to the joysticks memory. User name and password may be required.
●
Enter the camera’s assigned user name and password using the numeric keypad (e.g. you must press the “2”
key 3 times in sequence to select a “c”, or 2 times for a “b”). Note this camera login info is set by the individual
camera’s configuration utility and is not a function of this keyboard.
●
Use joysticks Tilt control to scroll to next found camera and repeat ADD process for each camera.
●
When all cameras have been added, press “ESC” button to return to top menu
●
Now you can operate the cameras, see section 2.3 to 2.5 below.
2.3 Switching between cameras using the Keyboard
●
When multiple devices have successfully been added, the user can use the "PREV” and "NEXT" keys on the
keyboard to cycle quickly between cameras. The LCD will update, showing the currently selected camera by its
IP address.
●
Once selected, you can control pan, tilt and zoom for the selected camera using the joystick and set and all
presets, etc… using the keyboard.
●
The “IP” key will allow discrete camera selection (rather than sequential cycling) but must first be setup using
the keyboard’s web browser interface.
●
Hints:
●
If the LCD ever displays “Equipment offline” for a particular camera, please check if the LAN connection of
camera is powered on and connected to the LAN.
●
If the LCD ever displays “Username or Password Error”, please check if the added device’s user name and
password have been changed in that camera’s configuration.
●
Press the “ESC” key to return to the top LCD menu at any time.
●
Press the “INQUIRE” key, while in the top LCD menu, to see the saved cameras at any time. Use the joystick
Tilt controls to scroll through the cameras.
●
“LINK” LED on rear of keyboard will illuminate green any time a camera is successfully connected to.
