36
Picture 1.2 Connect by router /interchanger
IP camera visited/ controlled by LAN
1
Setup IP address
1.1
Connect IP Camera to internet (or PC), then turn on the power on IP Camera, shown as above. IP address can
be searched via update software(software upgrading tool,named upgrade_En.exe in small CD in package). shown as below:
Run upgrade_En.exe (UPGRADE v1.8) by CD-Rom, click [Search].The software will show the current LAN camera's
IP address, subnet mask number, network gateway number and camera MAC serial number etc, shown as below:
If IPC IP address and PC IP address not in the same internet segment, upgrade_En.exe can modify IP address, subnet
mask and port number etc. accordingly.
In UPGRADE v1.8, select the camera needed to be modified, shown as below:
Содержание 20X-USB
Страница 1: ...PTZ Optics 20X USB User Manual V1 0 English...
Страница 38: ...37 Click config then go to below...
Страница 54: ...53 Method 2 Open upgrade_En exe change IP and click Set...