10
IR Remote Controller Explanation
0. Standby Button
Press this button to enter standby mode. Press it again to
enter normal mode.
(Note: Power consumption in standby mode is
approximately half of the normal mode)
1. Position Buttons
To set preset or call preset
2. * Button
3. Set/Clear Preset Buttons
Set preset:
Store a preset position
[SET PRESET] + Numeric button (0-9): Setting a
corresponding numeric key preset position
Clear preset:
Erase a preset position
[CLEAR PRESET] + Numeric button (0-9)
Or: [*]+[#]+[CLEAR PRESET]: Erase all the preset
individually
4. BLC (Backlight Compensation) Button
BLC ON/OFF:
Press this button to enable the backlight
compensation. Press it again to disable the backlight
compensation.(NOTE: Effective
only in auto exposure mode)
Note: If a light behind the subject, the subject will
become dark. In this case, press the backlight ON / OFF button. To cancel this function, press the backlight ON / OFF
button.
5. Focus Buttons
Used for focus adjustment.
Содержание 20X-USB
Страница 1: ...PTZ Optics 20X USB User Manual V1 0 English...
Страница 38: ...37 Click config then go to below...
Страница 54: ...53 Method 2 Open upgrade_En exe change IP and click Set...