24
25
How to Run a Quality Control Test
Refer to the instructions for use provided with your quality control materials.
If Quality Control Results Are Not in Range
IMPORTANT: Tests should not be performed until control results are
within range.
1.
Ensure test strip slot area is clean.
2.
Make sure neither the test strips nor the controls
are past the expiration date printed on the label.
3.
Make sure the MEMo Chip matches the test strip lot.
4.
Repeat the test again using fresh materials.
5.
Call Customer Service for assistance.
Blood Testing
A test strip package insert is included with each box of test strips. Please read the test
strip package insert along with this section of the user guide completely and carefully
before testing.
Testing Supplies
To perform a blood test you need:
• CardioChek
analyzer
• PTS Panels
self-test strips
• Lot-specific MEMo Chip
• Sterile lancet
• Capillary blood collector or pipet
• Gauze or cotton balls
• Alcohol wipe (optional)
This analyzer requires whole blood for testing. Do not operate the analyzer in direct
light. See Section 9,
Care and Cleaning
for more information.
Helpful Hints on Getting a Good Drop of Blood
1.
Wash hands in warm, soapy water.
2.
Rinse well and dry completely. If an alcohol wipe is used, let the finger air dry
before testing. Clean gauze may be used to dry alcohol.
3.
Warm the fingers to increase blood flow.
4.
Let the arm hang down at the side briefly to allow blood flow to the fingertips.
Running a Test
6
