pts Diagnostics CardioCheck PA, Руководство пользователя

Страница: 12 / 25

22 23
How to Set the Sound
The CardioChek PA analyzer sound has been preset to BEEP ON. To turn the sound on or
off, please follow the steps listed below:
1. If RUN TEST is displayed, go to Step 3. If the analyzer is off, press either button to
turn on the analyzer. Wait for the display to read INSTALL MEMO CHIP or
INSERT STRIP.
2. Press Next. The display will read RUN TEST.
3. Press Next until SETTINGS is displayed.
4. Press Enter, then Next until SOUND is displayed.
5. Press Enter. The display will read BEEP ON or BEEP OFF .
6. Press Next to select either BEEP ON or BEEP OFF .
7. Press Enter to accept the sound choice displayed.
8. Press Next until EXIT is displayed.
9. Press Enter to return display to SETTINGS.
10. Press Next to return to RUN TEST.
Introduction to the CardioChek PA and Printer System
The CardioChek PA analyzer (with software version 2.55 and higher) supports printing in
two formats, label or paper, on the CardioChek/PTS Connect™ printer or portable printer.
To verify CardioChek PA test system software, turn on the analyzer by pressing either
button. The software version will appear on the display.
How to Set Up the CardioChek PA for Printing
For complete details, refer to each printer’s user guide.
Testing the Printer
1. If the analyzer is off, press either button to turn on the analyzer.
Wait for the display to read INSTALL MEMO CHIP or INSERT STRIP.
Note: If RUN TEST is displayed, go to Step 3.
2. Press Next. The display will read RUN TEST.
3. Press Next until SETTINGS is displayed.
4. Press Enter, then Next until PRINT is displayed.
5. Press Enter, then Next until TEST PRINTER is displayed.
6. Press Enter and a sample printout will be generated.
How to Print Results From Memory
(Up to 30 test results per chemistry and up to 10 control results are alternatively stored)
1. Turn the CardioChek PA analyzer on by pressing either button.
2. Press Enter until RUN TEST is displayed.
3. From the RUN TEST menu press Next.
4. MEMORY will be displayed. Press Enter.
5. Press Enter to select CHEM.
6. Press Next to select the type of test, LIPIDS for example.
7. Press Next to select the date/time of the test result you want to print.
8. Press Enter to print the selected number of copies of results.
9. Control results can be printed by selecting CONTROL instead of CHEM and then
selecting the type of result as stated above.