PTR 1800HD, Руководство пользователя, Страница: 19 / 67

PTR Baler & Compactor Co.
2207 E. Ontario St Philadelphia, PA 19134
PHONE: 215-533-5100 * FAX 215-533-8907
Quality * History * Service* Value
Baling wire recommendation for PTR Baler and Compactor Company’s
standard built balers producing bales of ordinary cardboard. Consult
PTR Baler and Compactor for wire recommendations for non-cardboard
applications.
MODELS: 1800HD, 2318, 2300HD, 3400HD, 3600HD, 7230
Minimum of 14 Ga galvanized steel wire approximately 14’ long with one end looped for bale
tie off.
Wire is to have a tensile strength of approximately 70,000 to 85,000 psi or more and a break
strength of approximately 380 to 420 pounds or more.
MODELS: 360, 420
Minimum of 15 Ga galvanized steel wire approximately 9’ long with one end looped for bale tie
off.
Wire is to have a tensile strength of approximately 75,000 to 80,952 psi or more and a break
strength of approximately 300 to 340 pounds or more.
MODELS: 5000HD, 7200HD
Minimum of 12 Ga galvanized steel wire approximately 16’ long with one end looped for bale
tie off.
Wire is to have a tensile strength of approximately 70,588 to 76,136 psi or more and a break
strength of approximately 600 to 670 pounds or more.
Additional Information:
At least four baling wires must be used per bale. Slots are available for five or more bailing
wires to be used.
Care should be exercised when handling any potentially sharp objects such as bailing wire.
Follow appropriate precautions and procedures.
Always stand clear of ejecting bale.
Baling wire recommendation is based on industry standard and past history of success with this
wire in a wide variety of customer environments and usages of balers and other vertical balers
with comparable compression yielding bales of comparable size and weight.