Programmable Control Panel
PTN Electronics Limited 16 www.PTN-electronics.com
Compare Setting
This item is used for compare the feedback of RS232 commands. When WP8 send a
RS232 command to the controlled device, the device will send back a feedback. If we
add the correct feedback in the data, WP8 will compare it with the feedback received
from controlled device, to verify the command is work or not. The compare setting is as
the picture below:
1)
The send port must be selected as the same as model setting, otherwise the
event cannot be added. And port 1 cannot be used for compare, for there is no a
receive pin in this port.
2)
User can set the event name; it is optional function, not necessary.
3)
For the events in one event list have priority, from top to bottom, so that the
compare function can be used in action which with three or more events. When
send a serial command, we can add a compare then other events. If the compare
is incorrect, the event behind compare will not be executed.
LED setting
This item is used for set the button LEDs in WP8 to turn on/off. The setting is as below:
Enter the compare commands,
don
’t miss any character.
