HDMI Pro Extender (with PoC)
PTN Electronics Limited 3 www.PTN-electronics.com
Figure 2 Interfaces of TPHD403PLR
No.
Name
Description
①
On
Link
Out
Power
On: Used to show the working status, blinks when in normal
working state, turns off when stop working.
Link: Twisted Pair Link status indicator. It will keep on when
the connection is successful.
Out: When connected with device which supports HDCP
and works normally, this LED will keep on. If the transmitted
signal does not support HDCP, the LED will blink.
Power: Turn red and keep on when power on.
②
ETHERNET
Ethenet ports, connect with a router, to work as exchanger
along with the ETHERNET port of TPHD403PLT. If they are
well connected, the yellow LED indicators on the corresponding
ports will keep on and the green ones will blink when working.
③
HDBT IN
To connect with the HDBT OUT port of TPHD403PLT by using
a single CAT5e cable (90m length in max).
④
HDMI OUT
HDMI output port, connect with an HDMI displaying device.
⑤
IR IN&OUT
IN: Connect with IR receiver, receive IR signals and send
them via cable to the other end of the cable, for example the
IR OUT port of TPHD403PLT.
OUT: Connect with IR Emitter, transmit IR signals sent via
cable.
⑥
RS232
Serial port, 3-pin captive screw connector, connects with the
control terminal to control the controlled terminal, supports
bi-directional RS232 control between the transmitter
(TPHD403PLT) and the receiver (TPHD403PLR).
⑦
DC 24V
Connect with a DC 24V power adapter. (Either TPHD403PLT or
TPHD403PLR connecting with power adapter is enough.)
