PTN MUH44E KIT, Руководство пользователя

Страница: 19 / 40

MUH44E Kit 4K Home Distribution Hub
PTN Electronics Limited 14 www.PTN-electronics.com
The interface of the control software is showed as below:
Please set the parameters of COM number, baud rate, data bit, stop bit and the parity
bit correctly, only then will you be able to send command in Command Sending Area.
RS232 Communication Commands
Note :
1) Please disconnect all the twisted pairs before sending command EDIDUpgrade[X].
2)
In above commands, “[”and “]” are symbols for easy reading and do not need to be
typed in actual operation.
3)
Please remember to end the commands with the ending symbols “.” and “;”.
Monitoring area, indicates
whether the command
sent works.
Command Sending area
Parameter Configuration area