PT WS1V Series, Руководство по установке, Страница: 7 / 24

WS1V Set Up Manual Rev. 7.8.30gll
4.5 Selectable Weight Units and Piece Unit:
Kilogram (kg) 1 g = 0.001 kg
Gram (g) 1 g = 1 g
Pound (lb) 1 g = 0.002204623 lb
Pound/Ounce (lb, oz) 1 g = 0.03527396 oz
Ounce (oz) 1 g = 0.03527396 oz
Grain (GN) 1 g = 15.432358 GN
(dwt) 1 g = 0.6430149 dwt
Carat (ct) 1 g = 5 ct
Piece (pcs)
4.6 Error Messages:
⇒ The EEPROM memory is not working correctly.
⇒
Zero is higher than the zero range when switching the scale on. Calibrate the scale
⇒ Zero is lower than the zero range when switching the scale on.
⇒
A/D value is unstable.
⇒ A/D value is less than -31250. Faulty circuit board, damaged loadcell
⇒ A/D IC malfunction (cannot read A/D value). The load cell may not be connected to
the scale correctly.
⇒ A/D value is higher than +31250.
⇒ The weight of the object is over the maximum ca 9 divisions.
⇒ After calibration the displayed resolution is greater than the internal resolution.
⇒ The gravity value is outside the range 9.772 ~ 9.829.
⇒ Error setting.
⇒ The weight value is greater than the zero range, when re-zeroing the scale.
⇒ The weight value is below the zero range, when re-zeroing the scale.
Page 5