PT 200M, Быстрый старт

Страница: 20 / 32

Quick Start Manual Rev 1.0
Page 18
003R-620-100
GROUP
(GRP)
ITEM
(ITM)
SELECT
(SEL)
EDIT
(EDT)
Underline = Defaults
OK
CAL
ZERO
⊗ Zero Calibration
Routine
Set between zero and full
scale
(Current weight displays)
<SEL> key to start. Current weight displays.
Remove all weight.
<SEL>, <EDT> or <OK> starts routine ( Z.in P displays).
<ITM> key to exit, <SEL>, <EDT> or <OK> to repeat routine.
SPAN
⊗ Span Calibration
Routine
Set between zero and full
scale
(Current weight displays)
<SEL> key to start. Current weight displays.
Add test weight.
<SEL> or <OK> to show calibration weight value.
Set correct weight. <SEL> changes position, <EDT>
changes digit.
<ITM> or <OK> starts routine ( S.in P displays).
<ITM>
key to exit,
<SEL>, <EDT>
or
<OK>
to re-edit
calibration weight and repeat routine.
ED.LIN
⊗ Edit Linearisation
Points
Set between zero and full
scale
L1. - - - Select
Linearisation point 1 to 5
( L1, L2, L3, L4, L5 ).
(Approx. % of full scale)
<SEL> to step through list of points.
<OK> to change selected point or <ITM> to exit.
After
<OK>
current weight displays.
Add test weight.
<OK>
to enter corrected weight.
<SEL>
changes position,
<EDT> changes digit.
<OK> starts routine ( L.in P displays).
<ITM> key to exit, <OK> to repeat routine.