PT 200M, Быстрый старт

Страница: 17 / 32

Quick Start Manual Rev 1.0
003R-620-100
Page 15
7. Instrument Setup
7.1. Calibration Counter
The built-in calibration counter(s) monitor the number of times
trade critical settings are altered. Refer to Trade Critical
Settings below for more information and to the
OPTION:USE
setting page17.
The table below describes when the counter(s) will increment.
Industrial or OIML: The Calibration Counter increments
when trade critical settings are changed. An example of the
counter is
C.00019 .
NTEP: Two counters display.
The Calibration Counter increments when trade critical
settings in the Calibration ( CAL ) menu are changed. An
example of the counter is C.00010 .
The Configuration Counter increments when other trade
critical settings (ie. not in the CAL menu) are changed. An
example of the counter is F.00009 .
7.1.1. Trade Critical Settings
Trade critical settings can affect calibration and/or legal for
trade performance. In this document the
⊗
symbol indicates
the setting is trade critical. Each time a trade critical setting is
altered, the calibration counter will be incremented by one.
7.2. opto-LINK
For information on setting up using the opto-LINK cable refer
to opto-LINK page 6.