PST MICHELL Instruments MDM300, Руководство пользователя

Страница: 31 / 70

MDM300 User Manual
Michell Instruments 23
OPERATION
3.4 SET-UP Menu Parameters
Follow the instructions in Section 3.3.1 to select the required parameters.
3.4.1 SETTINGS
PRIMARY DP AT ATMOS
DP/TEMP UNIT °C
PRESSURE UNIT Psig
GAS TYPE AIR
MOL WEIGHT N/A
CHART INTERVAL 5 Sec
SETTINGS
PRIMARY DP AT ATMOS
DP/TEMP UNIT °C
PRESSURE UNIT Psig
GAS TYPE AIR
MOL WEIGHT N/A
CHART INTERVAL 5 Sec
SETTINGS
PRIMARY DP AT PRESS
DP/TEMP UNIT °C
PRESSURE UNIT Psig
GAS TYPE AIR
MOL WEIGHT N/A
CHART INTERVAL 5 Sec
SETTINGS
PRIMARY DP AT PRESS
DP/TEMP UNIT °C
PRESSURE UNIT Psig
GAS TYPE AIR
MOL WEIGHT N/A
CHART INTERVAL 5 Sec
SETTINGS
Figure 17 SETTINGS Page
Parameter Description
PRIMARY DP AT
Indicates if the primary display sensor is at atmospheric or system
pressure.
Available Input:
ATMOS
or
PRESS
(Atmospheric or Pressure)
DP/TEMP UNIT
Sets system temperature units.
Available Input:
°C, K, °F
PRESSURE UNIT
Sets system pressure units.
Available Input: psig, MPa, psia, bara, KPa, barg
GAS TYPE
Defines the sample gas type.
NOTE : The
MOL WEIGHT
field automatically reads
N/A
for
all gases other than
USER.
For any other type of sample gas, the molecular weight of the gas
must be defined in the MOL WEIGHT field.
Available Input:
Air, USER, SF6, CO2, N2
MOL WEIGHT
Sets molecular weight of user-defined sample gas, default value 1.
Available Input: Range 1 to 99
CHART INTERVAL
Sets chart time interval, default value 5.
Available Input: Range 1 to 60 seconds
Table 4 SETTINGS Parameters