00042853.DOC, Version 1.0
23/25
Caution:
The carrying capacity of the stand or speaker stand must never be exceeded!
Install the speaker-system via the flange on the speaker stand or via the TV-pin on the stand.
Make sure that the maximum lifting height of the tube is never exceeded.
Lifted telescopic tubes always have to be secured with a secondary securing!
Suspended installation
DANGER!
This speaker-system must only be suspended by experienced and trained persons - Danger to
Life due to crashing speaker-systems!
Trained persons are e.g. Head Rigger, Lightcrew head etc.
If you lack these qualifications, do not attempt the installation yourself, but instead use a professional
structural rigger.
If you have doubts concerning the safety of a possible installation, do NOT install the speaker-system!
The speaker-system has to be installed out of the reach of people.
The installation material must always hold at least 12 times the weight of the speaker-systems.
Attach the flying bracket to the suspension structure using a screw pin anchor shackle and appropriate sling,
cable, etc.
Lower the flying bracket onto the speaker-system and align the appropriate holes in the suspension links and
flying bracket, fully insert the safety pins, and ensure all pins lock properly.
Before lifting, ensure the audio connection to the enclosures are correct and functioning.
Installing the speaker cables
Connect the speaker systems among each other using the inputs and outputs. Connect the cable of the first
speaker system with the Output-socket of the mixer/amplifier. The signal will be transmitted to the individual
speaker systems.
Always treat the cables carefully and protect them from damages during transportation.
Install the cables always in a structured way and protect them from damage. The cables must be installed in
a way that no person can stumble over them. Always fix the cables with an appropriate tape.
Both cables should be of the same kind, should have the same length and should be installed directly (no
loops, S-shaped overlengths). Always install the cables far away from power cables (never closely parallel).
Never put heavy objects like speaker systems, flightcased etc. on cables. Never wind up cables tightly
around the elbow, but rather sleek with an interior diameter of 20 to 30 cm.
Connections
Speaker Out
Ihre Lautsprecherbox ist mit 4-poligen, verriegelbaren Speaker-Buchsen ausgestattet. Zum Verriegeln der
Verbindung drehen Sie den Stecker nach rechts bis er einrastet. Zum Entriegeln drücken Sie die Entriege-
lungstaste und drehen den Stecker nach links.
