W W W . P S S O . D E
22
5
INSTALLATION
The speaker systems can be set up as desired. Models CSA-218A and CSA-228A require special mounting
brackets which are available as accessories.
Fix the U-shaped brackets to the speakers (fig. 1 and 2). Then screw on the extension set for monitor use
(fig. 3) and adjust the desired inclination angle.
Notes
•
The location must be solid, plane, anti-slip, vibration-free, oscillation-free, and fire-resistant. The installation
area must hold a minimum point load of 5 times the system's load (e.g. weight 20 kg - point load 100 kg).
•
Always install the speaker systems in a way that a minimum distance of three meters to the audience is
kept. This is the only way to avoid hearing damage for unreasonable listeners. Block the area in front of the
speaker systems with appropriate means.
•
Extreme levels like feedback, bass-hum or the beats of a dropping microphone can destroy the
loudspeakers within very short time and produce immediate hearing damage. Such extreme levels must be
avoided at any rate. We recommend using appropriate equalizers and compressors/limiters.
•
Model CSA-115CXA: For transport, the subwoofer box features two carrying handles. The speaker system
should be carried without force by two persons of the same size. Carrying the speaker system as one
person alone should be avoided as the high weight and the strain could lead to back damages and
torsions. Please note that all speaker systems with more than 25 kg weight must be transported with two
persons.
Fig. 1
Fig. 2
Fig. 3
