9
FirstGard Hinge and Band Replacement Instructions
FIRSTGARD
™
HINGE REPLACEMENT
Repeat steps 3-7 for all broken hinge pieces.
STEP 7
Slide the new
hinge component
(D) onto the
FirstGard panel
(A1
or A3) in the same location and orientation it was removed.
Place a
nut
(G) into the recess in the
hinge component
(D).
Place a
screw
(F) into the opposite side of the hole of the
hinge component. Using a wrench and screw driver, tighten the
hardware.
Note:
Be sure to not overtighten hardware as it may
damage the panel and/or the hinge component.
Fold the two banded panels
(A1 and A3)
together leaving enough
room for the third panel
(A2)
between. The hinge components
should be facing inward.
STEP 5
STEP 6
STEP 8
F.
D.
G.
D.
A1. /
A3.
A3.
A1.
