5
FirstGard Hinge and Band Replacement Instructions
With the
nylon pin
(C) out, finger-tighten the
weld nut
(B) on top of
the nylon pin — flange side up.
Grip the flange of the
weld nut
(B) with pliers and using a 7/16”
wrench on the
nylon pin
(C), tighten an additional ¼ turn past fin-
ger-tight.
STEP 1
STEP 2
PIN REPLACEMENT
FIRSTGARD
™
PIN REPLACEMENT
PARTS NEEDED FOR FIRSTGARD HINGE REPLACEMENT
TOOLS REQUIRED - 7/16” WRENCH, PLIERS
Part A.
FirstGard Cone Panels
Quantity - 1
Part B.
Weld Nut
Quantity - 1
Part C.
Nylon Pin
Quantity - 1
C.
B.
C. B.
