Psion PowerScan M8300 series, Краткое руководство пользователя

Страница: 11 / 22

PowerScan™ M8300 Configuration
Quick Reference Guide 5
PowerScan
™
M8300 Configuration
PowerScan
™
M8300/BC-80X0 Point-to-Point Setup
A rapid configuration procedure has been devised for point-to-point
applications where a single reader is associated exclusively with its own
BC-80X0 base station and where it is not necessary to set the Date and
Time parameters.
A special pre-printed bind-address label provided in the BC-80X0 base
station package can be used to bind the PowerScan
™
M8300 reader to
the base station with the address coded on the label. The address is also
written numerically on the label to be easily recognized. Valid addresses
are in the range from 0000 to 1999. Make sure that all cradles used in
the same area have different addresses.
To rapidly configure your point-to-point application:
END OF PROCEDURE. YOUR READER IS NOW READY TO READ
CODES.
1.
Apply the bind-address label onto the BC-80X0 base station as
indicated in the BC-80X0 Cradle Quick Reference Guide.
2.
When the BC-80X0 cradle is connected and powered, read the
Bind-Address label to pair the PowerScan
™
M8300 to the BC-
80X0 cradle.
The green LED on the PowerScan
™
M8300 will blink: the reader
is ready to be positioned onto the cradle.
3.
Firmly position the reader onto the cradle within 10 seconds, a
beep will be emitted, signaling that the BC-80X0 cradle has been
paired to the PowerScan
™
M8300, and the green LED on the
reader will go off.
If it ever becomes neces-
sary to change the reader,
just read the bind-address
label applied to the cradle
and position the new reader
onto the cradle.
Do not use multiple read-
ers with this configuration
method.
4.
Configure the BC-80X0 cradle, refer to the “BC-80X0 Quick
Reference Guide”.
Green LED