8 0 0 0 2 0 3
ConneCtInG the DoCkInG statIon to
a host ComPuter.
USB host computer
Omnii acts as a USB Client in the Docking Station.
QuICk start
GuIDe
March 16, 2011
PN 8000203.B
ISO 9001 Certified
Quality Management System
Charge LED Behaviour
Function
OFF
No battery detected.
Solid Green
Battery charging complete.
Flashing Green
Charge in progress.
Flashing Yellow
Battery is not charging due to out-of-temper-
ature conditions.
Solid Red
Unable to read battery or non Psion battery.
Note:
Full
battery performance is only
reached after the first few
charge/discharge cycles.
3-4 h
0 - 40 °C
32 - 104 °F
Allow Omnii and the spare battery to charge for 3-4
hours before first use.
4
Docking Station Battery Charge LED Behaviour
Insert the spare battery.
>
During charge, the LED indicator on Omnii
flashes GREEN.
>
When finished charging, the indicator
displays solid GREEN.
>
The LED indicator on the Docking Station
behaves the same when a spare battery is being
charged.
Place the battery contacts down to mate with the connector,
then pivot the battery into place in the battery charge well.
3
DesktoP DoCkInG
statIons
ST1050-1 AC power
supply
IEC320-C13
power cord
USB Micro-B to Type A cable
1. Connect the smaller end of the USB cable to the Docking Sta-
tion (ST4002-1 shown).
2. Connect the flat end of the USB cable to the host computer.
The spare battery may require an extra 4 hours to charge if an
Omnii is also docked.
© Copyright 2011 by Psion Inc.
Psion, Psion Teklogix, Omnii, and Ikôn are trademarks of Psion Inc. Other product names
mentioned in this document are trademarks or registered trademarks of other hardware,
software, or service providers and are used herein for identification purposes only.
