Setting up for the Internet
5
Introduction to setting up
This manual contains information about setting up your Series 5 so that you can connect to the Internet, and set up Email
to send and receive fax, email and SMS messages. This section starts with a list of the information that you need to collect
about your modem, phone line and Internet connection. It then leads you through the process of setting up.
•
Read the ‘Setting up the Control panel sections and Email’ section for full details on setting up your Series 5.
•
If you are an experienced Series 5 user and are familiar with setting up computers to connect to the Internet, read the
‘Quick setup for advanced users’ section.
•
Read the ‘Quick setup for Infrared mobile phones’ section for information on how to set up your Series 5 to work
with an infrared mobile phone.
•
If the setup instructions don’t cover all the things you need, see the ‘How do I...?’ section for more details.
Memory requirements
Please note the approximate memory requirements for running the software:
•
To run Email and send and receive messages, you should have at least 1000K free.
•
To install and run Web and open an average-sized Web page with graphics, you should have at least 2500K free.
These figures are guidelines only. The actual memory requirements of either Email or Web at any particular time will
depend largely on the nature of the information you are sending or receiving from your Internet service.
