background image

4

English

5

English

PORT IDENTIFIcaTION

Connect the Model 10 to a wall outlet, select “Port ID” and then go to the 

hub or switch connected to the wall outlet. The Link light for the port con-
nected to the wall outlet will blink at a rate similar to the pattern selected on 
the Model 10. Three patterns are provided.

SHORT cIRcUIT TEST

Connect the Model 10 to a cable with the test leads and select “Short”. If 

a short is detected, the LED will stay on continuously otherwise the LED will 
blink. The short circuit test is available on pins 4,5 of the RJ-45 jack.

baTTERY lIFE

Auto Power Down – 

The Model 10 will automatically turn off after approxi-

mately 20 minutes of operation.

Low Battery –

 When the battery is below the level required for the Model 10 

to operate properly, the “LoBatt” indicator illuminates.

WaRRaNTY

Psiber Data warrants that the product shall be free from defects in parts or workmanship for a period of 12 months from the 
date of purchase if used in accordance with Psiber Data operating specifications.
THIS IS THE ONLY WARRANTY MADE BY Psiber Data AND IS EXPRESSLY MADE IN LIEU OF ALL OTHER WARRAN-
TIES EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABI-
LITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Should any parts or workmanship prove defective, Psiber Data will repair or replace at Psiber Data’ option, at no cost to the 
Buyer except for shipping costs from the Buyer’s location to Psiber Data. This is Buyer’s SOLE AND EXCLUSIVE REMEDY 
under this Agreement. This warranty does not apply to products which have been subject to neglect, accident or
improper use, or to units which have been altered or repaired by other than an authorized repair facility.

For US-Customers:
Return of Equipment – To return a product to Psiber Data Systems Inc., first obtain a Return Authorization number from our 
Customer Service by c1 619-287-9970. The RA# must be clearly marked on the shipping label, or the package will 
not be accepted by Psiber Data Systems Inc. See sample label below.

To: Psiber Data Sytems Inc.
7075-K Mission Gorge Road
San Diego, CA 92120

RA# XXXXXXXX

For European-Customers:
Return of Equipment – To return a product to Psiber Data GmbH, first obtain a Return Authorization number from our 
Customer Service by c49-89-89136060. The RA# must be clearly marked on the shipping label.

To: Psiber Data GmbH
Felix-Wankel-Str. 4
82152 Krailling
Germany

RA# XXXXXXXX

Copyright 2009 Psiber Data. All rights reserved. CableTracker, psiber and the Psiber logo are trademarks of Psiber Data.

Отзывы: