A.
Plug the wire into the correct Test Port, e.g. Ethernet to RJ45
B.
Plug the opposite end into the Main Remote
C.
Press Network Button
D.
The LCD Display reports wire condition, Pass/Fail
E.
To turn off, press O/ID Button
Toning:
A.
With the unit turned OFF, hold down the LENGTH/TONE button until LCD
illuminates
B.
To select a tone cadence, press the LENGTH/TONE button repeatedly to
step through the four cadence options: HI, LO, Hi-Lo1, and Hi-Lo 2. Stop
when you reach the option you want. The option you select determines
the cadence sent from the main tester, through the cable, and picked up
by the tone tracer probe*.
C.
Press the appropriate cable type button (voice, video or data) to select a
cable for the tone signal
* Note:
Tone is detected by a tone tracer probe (optional)
Features:
Testing:
CM400 shows Opens, Shorts, Miswires, Split Pairs, PASS and
FAIL results quickly.
Toning:
CM400`s built- in tone generator is a flexible and function- packed
Tone generator. Its configurable signal can be generated to find and fix the
position on any type of cable – either exposed or hidden, in ceilings or
behind walls.
Length:
CM400 determines the length (in feet or meters) of an entire cable
and/ or individual wire pairs within the cable.
Option:
CM400 is supported by (1-19) wiremapping ID locators (Network/
Coax) and (1-8) testing/ID remotes (Network/Telephone).
English
