PSI PlantPen/N-Pen N 110, Инструкция по эксплуатации

Страница: 24 / 33

Page | 24
9 F
LUOR
P
EN SOFTWARE
9.1 S
OFTWARE INSTALLATION
1. Copy the FluorPen software provided on the USB flash disk to your computer and launch the FluorPen program.
2. To connect and recognize the N-Pen device in
the FluorPen software, proceeds first with the
registration of the FluorPen software (Fig. 13).
•
Select: Help > Register
•
Enter: your serial registration number
(found in a text file on the USB flash disk
drive included with the device).
•
Select: OK
Please note that the serial (registration) number for the N-Pen may be found in the file SN.txt , which is included
on the enclosed USB flash disk.
Please Note: it is not possible to download data from the N-Pen device without software registration.
3. Switch on the N-Pen and enable Bluetooth or
connect USB cable to the PC.
4. Ensure the PC and the N-Pen are properly paired
(see chapter 7 and 8 for complete information on
USB and Bluetooth pairing).
5. In the software select: Setup > Device ID (Ctrl+I) . If
properly connected, the message “Device: N Pen”
appears in the bottom part of the screen (Fig. 14).
If the connection is not successful then message
“Device not found” will appear. In the latter case
check all the connections (USB) and Bluetooth
pairing.
Fig. 13 Software registration.
Fig. 14 Connecting N-Pen with software.