PSG Wilden H1500 Saniflo HS Series, Инженерия, эксплуатация и обслуживание

Страница: 12 / 32

WILDEN PUMP & ENGINEERING, LLC
10
WIL-12350-E-05
Step 5
Next, remove the clamp bands that secure the ball valve
housing to the liquid chamber . Remove the ball valve hous-
ing, valve ball and gasket . After removing ball valve housing,
inspect for abrasion in the ball cage area .
NOTE: If your pump is fitted with a mushroom valve, remove
the mushroom valve housing, mushroom valve and gasket .
Step 6
Loosen the nut and remove the inlet manifold clamp bands .
Next, remove the clamp bands that secure the valve hous-
ing to the liquid chamber . After removing ball valve housing,
inspect for abrasion in the inlet manifold area .
Step 7
Next, remove the ball valve housing, valve ball and gasket
from liquid chamber . To ensure proper alignment during reas-
sembly of manifold/liquid chamber interface, turn off-set
portion of valve housing to the left or to the right . This proce-
dure works for the inlet and discharge manifold connections .
Step 8
Inspect the ball valve housing and valve ball for signs of
abrasion .
P U M P D I S A S S E M B L Y