WIL-17011-E-02
10
CSA-Certified Pumps
GPS220/GPS230 METAL
RUBBER-FITTED
Ship Weight…………..Aluminum 19 kg (41 lb)
316 Stainless Steel 31 kg (68 lb)
Air Inlet…………….…………………………1/2"
Inlet…………………………………..25 mm (1")
Outlet………………………………...25 mm (1")
Suction Lift……………………6.9 m Dry (22.7')
9.0 m Wet (29.5')
Disp. Per Stroke
1
…………….0.30 L (0.08 gal)
Max. Flow Rate……………..204 lpm (54 gpm)
Max. Size Solids…………………6.4 mm (1/4")
1
Displacement per stroke was calculated at 4.8
bar (70 psig) air inlet pressure against a 2.1 bar
(30 psig) head pressure.
Example:
To pump 140 lpm (37 gpm) against
a discharge pressure head of 2.8 bar (40
psig) requires 5.5 bar (80 psig) and 60 Nm
3
/h
(38 scfm) air consumption.
Flow rates indicated on chart were determined by pumping water. For optimum life and performance, pumps
should be specified so that daily operation parameters will fall in the center of the pump's performance curve.
Caution: Do not exceed 8.6 bar (125 psig) air supply pressure.
GPS220/GPS230 METAL
FULL-STROKE
PTFE-FITTED
Ship Weight.………….Aluminum 19 kg (41 lb)
316 Stainless Steel 31 kg (68 lb)
Air Inlet…………….…………………………1/2"
Inlet…………………………………..25 mm (1")
Outlet………………………………...25 mm (1")
Suction Lift……………………5.2 m Dry (17.0')
9.0 m Wet (29.5')
Disp. Per Stroke
1
…………….0.30 L (0.08 gal)
Max. Flow Rate……………..197 lpm (52 gpm)
Max. Size Solids…………………6.4 mm (1/4")
1
Displacement per stroke was calculated at 4.8
bar (70 psig) air inlet pressure against a 2.1 bar
(30 psig) head pressure.
Example:
To pump 83.3 lpm (22 gpm)
against a discharge head of 2.8 bar (40 psig)
requires 4.1 bar (60 psig) and 36 Nm
3
/h (23
scfm) air consumption.
Flow rates indicated on chart were determined by pumping water. For optimum life and performance, pumps
should be specified so that daily operation parameters will fall in the center of the pump's performance curve.
Caution: Do not exceed 8.6 bar (125 psig) air supply pressure.
PERFORMANCE
