PSG MINI-CADDY PF01301, Инструкция по установке и эксплуатации

Страница: 9 / 63

9
When ignited, creosote produces an extremely hot fire inside the chimney. To
avoid this situation, it is important to do the rotation of wood away from heating
appliances and lighting products. Inspect the chimney system at regular intervals
to determine a cleaning cycle. A weekly cleaning might be required during mild
temperature periods but a monthly cleaning should be sufficient during cold
periods.
If a significant layer of creosote has accumulated, it must be removed
immediately to eliminate the risk of chimney fire.
(It is recommended to clean
the heat exchangers thoroughly at the end of season in order to prevent
corrosion).
Remember that a small, hot fire is preferable to a large smouldering one to
prevent creosote build-ups within the system. Prepare an emergency procedure
in case of a chimney fire (See
Section 4.6 .)
2.5 SMOKE
DETECTOR
We highly recommend the use of a smoke detector. It must be installed at least
15 feet (4,57 m) from the appliance in order to prevent undue triggering of the
detector when reloading.
2.6 DOOR
GLASS
To maintain a clean and safe installation, do not build your fire too close to the
glass or allow logs to lean on the glass. Do not operate your furnace at too low a
setting. Keep the air inlet opened long enough during the fire start-up to prevent
the fire from smouldering, which could stain the glass.
An intense fire will help keep the glass clean. However, in the event that your
glass gets stained, which should not occur under normal operating conditions,
you will have to clean it using a wet cloth and a wood stove glass cleaner. Clean
the glass
ONLY when the unit has cooled down. Do not use abrasive cleanser.
Wood stove glass cleaners are available in most home centers and specialty
hearth retailers.
WARNING
AVOID KNOCKING OR SCRATCHING THE GLASS. IT COULD CRACK OR
BREAK.