_______________________________________________________Installation
Plumbing Connections:
Warning
Before any connection, pay attention to these subjects:
1. Debris or residue may become lodged into the Hot and Cold hoses during construction, which may clog
the Hot and Cold Mixer. To clean, drain a good amount of water from water hoses to bucket before
connecting them to the pedicure spa. Failure to do so may void your Warranty.
2. Hooking up a used Hot/Cold flex hose is not recommended since debris from broken rubber seal might
clog water mixer. Failure to do so may void your Warranty.
3.
Backflow preventer: Due to differences in construction lay-
out of your Salon and City’s plumbing code,
please contact your local Plumber to fulfill your needs as required. Backflow Preventers are not supplied
by the pedicure spa manufacturer.
4.
Check valve is an optional part and supplied free of charge for your convenience. Factory is not liable for
this Check valve.
5.
Maximum Inlet water pressure must be under 75 PS
I
.
Power Drain (optional):
7
Seat Back
Up/Down Swinging Arm Rest
3/4 “ PVC Drain
1/2 “ ID Hot Water
3/4 “ Check Valve
1/2 “ ID Cold Water
Back Shell Mounting Screws
8.5”
5.5”
26 ”
